HID LED 360 Lamp Retrofit


LED Lamp Replacement for MH or HPS Lamps in Decorative Pole Lighting and Acorn Globe Fixtures

Specification Summary
Lumens 5,000 - 8,400 Watts 53 - 90
Distribution Type V DLC Qualified
See More

HID LED Lamp Retrofit for Architectural Post Tops

This High Pressure Sodium (HPS) – Metal Halide (MH) LED Lamp Retrofit is design to quickly and easily upgrade HID Architectural Post Tops with energy efficient LED light engines. It is available in an E-39 mogul base or an E26 Edison standard base. The HID LED 360 lamp is a line driven with the ballast bypassed and can be installed with line voltages of 100 to 277VAC.

LED Replacement for HPS or MH Lamps in Post Tops

LED Post Top Retrofit Lamp for 70W to 400W Enclosed HID FixturesThis is a direct LED replacement for Metal Halide (MH) and High Pressure Sodium (HPS) lamps up to 400W MH and HPS lamps while enhancing the quality of light from architectural post top fixtures. The HID 260 Lamp Retrofit is for use in fully enclosed post top fixtures such as acorn fixtures or other decorative globe decorative pole lighting. Other models of LED pole replacement lamps are available for wall pack and shoe box fixtures, with HID LED horizontal lamps or for use with existing HID ballasts. Energy Efficient LED Upgrade Lamp for Decorative Pole Lighting The HID LED 360 is very energy efficient and delivers very high quality lighting with over 60% energy savings and has a rated life of 50,000 hours up to three times longer than that of HID lamps. Its built-in LED driver allowing lamp operation from line voltages between 120V-277VAC. The optical diffusor and lens hides the LED components typically found on LED corncob lamps, improving the light focusing and mimicking the look and feel of existing MH lamp sources.

High Quality Lighting for Post Tops or Lanterns

The HID LED 360 is available in a range of color temperatures including 2000K a very warm almost incandescent white, to neutral white of 3500K, 4000K and bright white of 5000K. The HID LED 360 delivers consistent light levels across its long life. This LED is well suited for decorative pole lighting upgrades in historic district lighting, park and recreational post tops, acorn fixtures in parking lots, campus or university historic pole fixtures or many other lighting needs. The E39 Edison base version of the HID LED 360 is DLC listed with rebates available in many areas.

HID LED 360 Lamp Retrofit Features

  • Replaces High Intensity Discharge (MH and HPS) lamps with higher quality, lower cost LED lighting
  • Line Driven lamp; supports 120V - 277V for quick and easy field installations
  • Ideal for enclosed fixtures of many styles and decorative globe styles
  • LED 360 available in models from of 6,00 and 8,000 lumens fixture delivered light output
  • Yields 60%-80% energy savings and much lower maintenance costs
  • Very high quality light source with 80 CRI
  • Wide range of Color Temperature (CCT) of 2000K, 3500K, 4000K and 5000K
  • Supports Mogul (E39) and Medium (E26) base HID sockets
  • Support ambient temperatures up to 150 F

HID LED 360 Lamp Retrofit - Specification
Model LUN-PT-HID360 Watts Range 53W, 90W
Rebates DLC Warranty 5 Years
Size 8.181 in / N/A / 4.362 In Dia Weight 3 lbs
Colors White Options N/A
Accessories N/A Lumens / Watt 93 lm/ w
Lumens 5,000lm, 8,400lm CCT Range 2,000K - 5,000K
L-70 50,000 hrs CRI >80
Distribution Type V Volts 100-277VAC

Thank You

We have received your request for a quote.

Do you need immediate help?
E-mail Us - (518)-409-8090 - (518)-321-0532

Would you like to tell us a little more about your needs for HID LED 360 Lamp Retrofit?

What timeframe would you need the product by?

Which of the following applications are you interested in?

DLC Listed?

The DesignLights Consortium™ (DLC) is a collaboration of utilities and energy efficiency organizations to accelerate energy efficiency measures in commercial buildings. The rebate process that many utilities use requires DLC qualified products to be installed and substantial energy savings realized. As part of the lighting rebate process, the DLC List is the first step in examining outdoor lighting and other projects for rebate eligibility. The DLC list requires LED fixture manufacturers submit test results from certified labs on the luminaires to be qualified, or 'listed' by the DLC. The reports submitted for the DLC qualification process include the LM-79 report that quantifies the LED fixtures performance, as well as, the LM-80 report that examines the actual LED light engine and uses TM-21 methods to project LED lifetimes. By submitting these reports and undergoing the DLC Qualification Process, assures that the Manufacturer of LED lighting products, have met certain minimum specifications for performance, as well as reassurance to the buyer.

DLC List - Specifications for Outdoor and other LED Lighting

For people procuring LED light fixtures, being on the DLC Qualified Product List, assures that the LED outdoor lighting manufacturer specifications have been reviewed and meet minimum performance parameters. The main DLC Qualified Product List performance specifications include:
  • Minimum light output (lumens) from the LED fixture based on lighting application type
  • Zonal Lumens - How the light output is distributed from the fixture to its lighting task
  • Minimum luminous efficiency - How many watts of energy does it take to produce light in lumens per watt
  • Correlated Color Temperature (CCT) - A measure of how the light appears from warm colors like incandescent at a 1,600K CCT to noon bright white at 5,000K CCT.
  • Color Rendering Index - An indication of how color appears under reflected light of the LED fixture. Typical HID metal halide ratings are in the CRI 60 range, incandescent light by definition is a CRI of 100.
  • Lumen Maintenance (L-70) is a projected value of when an LED light source will produce 70% of its original light output. It is listed in hours and the accepted value for the end-of-life for an LED fixture. An L-70 lifetime rating is temperature dependent and is usually listed at 25° C. An L-70 lifetime of 50,000 hours at 12 hours per day of LED fixture use is 11.4 years of outdoor lighting fixture use.
  • Warranty - The DLC requires some more tea of five years

DLC List and Rebates for LED Outdoor Lighting

LED lighting rebates are most often offered by Electric Utilities, and sometimes by State grant making organizations. Rebates are highly variable, and have many different requirements to be eligible for rebates. But in general, a product that is qualified on the DLC List is a good indication that rebates for outdoor lighting can be obtained. A good first source for finding rebate information is the DSIRE (Database of State Incentives for Renewables & Efficiency). Outdoor lighting rebates are generally of two types, qualified product rebates and performance based programs. Qualified product rebates are most often a rebate of a fixed amount per fixture replaced, while the performance based programs are based on the kilowatt hours or peak kilowatts of load electricity saved.

Rebate Process for LED Outdoor Lighting

Determination of which option is optimal in obtaining outdoor lighting rebates will require a modest amount lighting design and economic analysis. In overview, the rebate process involves:
  • Inventorying existing HID lighting fixtures,
  • Determine what lighting levels are required for the outdoor lighting application,
  • Selecting LED fixture will meet these lighting requirements at the lowest possible energy use
  • Compiling a spreadsheet of existing lighting fixtures compared to the proposed fixtures
Most utilities will require a spreadsheet that lists what HID fixture is being replaced with what DLC Listed product. The spreadsheet will often articulate the savings per fixture count, application type (e.g. garage lighting), and the total kilowatt hours saved and the load reduction in kilowatts. Based on this information the utility can quickly qualify the LED lighting installation for rebates, and give a general indication of the rebate amounts and levels. After the project is installed, most often certifications are required by the property owner that the installation has been completed, and in some cases, a site inspection will take place. The Utility or other rebate grantor will then mail a check to the property owner for the agreed rebate amount.