Products

LED Canopy Light Fresnel Lens with Sensors ACECP

MET-NB-ACECP

LED Canopy Light with Fresnel Lens with Occupancy Sensor, Photocell Option for Outdoor Ceiling Lighting
Quick Ship Available
Volume Discounts Available
Minimum Order Quantity: 5

Specification Summary
Lumens 4,150 - 6,000 Watts 45 - 70
Distribution Type V DLC Qualified
See More

High Efficiency, Fresnel Lens Canopy / Soffit Lighting for Outdoor Ceilings with Sensors

For outdoor ceiling lighting this LED Canopy / Soffit fixture has very high efficiency and sensors that can provide even more energy savings than traditional outdoor lighting. As an option this fixture can be ordered with either photocells for dusk to dawn operation, with occupancy sensor that provides on on-off control, or with an occupancy sensor that provides bi-level controls. These features can often save up to 90% of the energy use of traditional CFL lamps or metal halide lamps. As added benefit, occupancy sensor provides a high degree additional security in areas that may be attended at all hours.

LED Canopy/ Soffit Fixture for Commercial Outdoor Lighting

This LED Canopy fixture provides very high efficiency, of over 86 lumens per watt and up to 95 lumens per watt. It uses an advanced Fresnel lens to provide a very even quality of light in a NEMA 7x7 symmetric pattern for very effective delivery of light onto the ground at the lowest possible cost. It is a small footprint of 10x10 inches square and has low profile of 2 7/8” deep. It has a CRI value of over 80 providing a very natural clean light from the LED light engine. It is designed for a long life with an L-70 rating of over 100,000 hours. It is available in two models of 45W and 75W, in color temperatures of 4,000K and 5,000K.

LED Canopy Light Fresnel Lens with Sensors ACECP - Specification
Model MET-NB-ACECP Watts Range 45W, 70W
Rebates DLC Warranty 5 Years
Size 10 in. / 10 in. / 2 7/8" Weight 4.4 lbs
Colors Bronze (std), Black, Silver, Gray, White Options Occupancy Sensor, Photocell
Accessories N/A Lumens / Watt 86-95 lm/ watt
Lumens 4,150lm, 6,000lm CCT Range 4,000K, 5,000K
L-70 >100,000 CRI >80
Distribution NEMA 7x7 Volts 120-277VAC, 347-480VAC

Features of ACEP Canopy Light with Advanced Lighting Controls

ACECP Canopy Fixture Construction

  • Very low profile architectural look in a small footprint for upgrading canopy lighting or new construction.
  • Superior heat sinking with external Air-Flow fins for longevity of operations.
  • Rated IP65 for wet and damp locations in outdoor ceiling lighting

    ACECP Canopy Lighting Mounting Options

  • Special J-box mount without opening the fixture for surface mounting on canopy ceilings
  • 3/4’’ pendant mount capable for suspended lighting

    ACECP Canopy Light Electrical Features

  • High Power Factor, low THD UL listed driver with 10KV surge protection.
  • Universal line voltage input 120-277V, 347/480V optional

    ACECP FCC compliant

  • 0-10V dimmable optional for maximum energy savings

    Canopy Light Controls

  • Optional Dusk to Dawn Photocell
  • 0-10V dimming optional for integration with advanced energy management systems
  • Optional concealed Bi-Level occupancy sensor for on-off operation or optional bi-level occupancy controls

    Canopy Light with Sensor Warranty and Certifications

  • 5 years warranty for complete fixture
  • UL, DLC, RoHs, and IP65

LED Canopy Light Photometrics - NEMA 7x7

Uniform LED Canopy Lighting with Symmetric NEMA 7x7 Light Pattern


Thank You

We have received your request for a quote.

Do you need immediate help?
E-mail Us - (518)-409-8090 - (518)-321-0532

Would you like to tell us a little more about your needs for LED Canopy Light Fresnel Lens with Sensors ACECP?

What timeframe would you need the product by?

Which of the following applications are you interested in?

DLC Listed?

The DesignLights Consortium™ (DLC) is a collaboration of utilities and energy efficiency organizations to accelerate energy efficiency measures in commercial buildings. The rebate process that many utilities use requires DLC qualified products to be installed and substantial energy savings realized. As part of the lighting rebate process, the DLC List is the first step in examining outdoor lighting and other projects for rebate eligibility. The DLC list requires LED fixture manufacturers submit test results from certified labs on the luminaires to be qualified, or 'listed' by the DLC. The reports submitted for the DLC qualification process include the LM-79 report that quantifies the LED fixtures performance, as well as, the LM-80 report that examines the actual LED light engine and uses TM-21 methods to project LED lifetimes. By submitting these reports and undergoing the DLC Qualification Process, assures that the Manufacturer of LED lighting products, have met certain minimum specifications for performance, as well as reassurance to the buyer.

DLC List - Specifications for Outdoor and other LED Lighting

For people procuring LED light fixtures, being on the DLC Qualified Product List, assures that the LED outdoor lighting manufacturer specifications have been reviewed and meet minimum performance parameters. The main DLC Qualified Product List performance specifications include:
  • Minimum light output (lumens) from the LED fixture based on lighting application type
  • Zonal Lumens - How the light output is distributed from the fixture to its lighting task
  • Minimum luminous efficiency - How many watts of energy does it take to produce light in lumens per watt
  • Correlated Color Temperature (CCT) - A measure of how the light appears from warm colors like incandescent at a 1,600K CCT to noon bright white at 5,000K CCT.
  • Color Rendering Index - An indication of how color appears under reflected light of the LED fixture. Typical HID metal halide ratings are in the CRI 60 range, incandescent light by definition is a CRI of 100.
  • Lumen Maintenance (L-70) is a projected value of when an LED light source will produce 70% of its original light output. It is listed in hours and the accepted value for the end-of-life for an LED fixture. An L-70 lifetime rating is temperature dependent and is usually listed at 25° C. An L-70 lifetime of 50,000 hours at 12 hours per day of LED fixture use is 11.4 years of outdoor lighting fixture use.
  • Warranty - The DLC requires some more tea of five years

DLC List and Rebates for LED Outdoor Lighting

LED lighting rebates are most often offered by Electric Utilities, and sometimes by State grant making organizations. Rebates are highly variable, and have many different requirements to be eligible for rebates. But in general, a product that is qualified on the DLC List is a good indication that rebates for outdoor lighting can be obtained. A good first source for finding rebate information is the DSIRE (Database of State Incentives for Renewables & Efficiency). Outdoor lighting rebates are generally of two types, qualified product rebates and performance based programs. Qualified product rebates are most often a rebate of a fixed amount per fixture replaced, while the performance based programs are based on the kilowatt hours or peak kilowatts of load electricity saved.

Rebate Process for LED Outdoor Lighting

Determination of which option is optimal in obtaining outdoor lighting rebates will require a modest amount lighting design and economic analysis. In overview, the rebate process involves:
  • Inventorying existing HID lighting fixtures,
  • Determine what lighting levels are required for the outdoor lighting application,
  • Selecting LED fixture will meet these lighting requirements at the lowest possible energy use
  • Compiling a spreadsheet of existing lighting fixtures compared to the proposed fixtures
Most utilities will require a spreadsheet that lists what HID fixture is being replaced with what DLC Listed product. The spreadsheet will often articulate the savings per fixture count, application type (e.g. garage lighting), and the total kilowatt hours saved and the load reduction in kilowatts. Based on this information the utility can quickly qualify the LED lighting installation for rebates, and give a general indication of the rebate amounts and levels. After the project is installed, most often certifications are required by the property owner that the installation has been completed, and in some cases, a site inspection will take place. The Utility or other rebate grantor will then mail a check to the property owner for the agreed rebate amount.